Enable logging of rawdata, see forum post:
How do I enable logging of rawdata?
Example of rawdata:
- Code: Select all
000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
3/13/12 9:49AM 102 03 0824524973 00:02'44" 0112
microBuffer Rev 1.08
Startup
Total memory fitted = 32768 0 0
PC baud rate = 9600
PABX baud rate = 4800
Beeper disabled
Seven bit only logging disabled
PC baud rate = 9600
Auto Dump on DTR disabled
Auto Dump delay = 20 * 50 milliseconds
Convert to Upper Case disabled
Sequence number storing disabled
STX = FF
ETX = FF
Store multiple linefeeds disabled
000000000000000000000000000000000000000000000000000000'32" 5645
3/13/12 9:59AM 101 03 1026 00:00'04" 5645
00000000000000000000000000000000000000 0828233630 00:00'31" 5645
3/13/12 10:02AM 101 03 0543375556 00:00'39" 5645
00000000000000 10:04AM 101 03 1026 00:00'40" 5645
0000000000000000000000000000000000000000000000000000000000000000000000
3/13/12 10:07AM 101 03 0861114351 00:05'36" 5645
0000000000000000000000000000000000000000000000 00:00'24" 5645
3/13/12 10:40AM 101 03 1026 00:00'29" 5645
0000000000000000000000000000001 03 0543375556 00:00'34" 5645
3/13/12 10:42AM 101 03 0828233630 00:00'25" 5645
00000013/12 10:43AM 101 01 0722679302 00:00'20" 5645
000000000000000000000000000000000000000000000000000000000016" 5645
3/13/12 10:45AM 101 03 0800375375 00:00'16" 5645
NOTE: The data seems shifted due to zeroes.
Corrected output format:
------------------------
- Code: Select all
Date Time Ext CO Dial Number Ring Duration Acc code CD
--------------------------------------------------------------------------------
05/07/04 11:38AM *2241 04 6244587 00:01'39 523
Date Time Ext CO Dial Number Ring Duration Acc code CD
--------------------------------------------------------------------------------
14/07/05 10:26 143 32 0724477653 00:01'39 5302
14/07/05 10:27 300 21 <I> RC
14/07/05 10:27 500 21 <I> 0'06 00:00'00
14/07/05 10:27 138 31 0722241321 00:05'52 0722
Date Time Ext CO Dial Number Ring Duration Acc code CD
--------------------------------------------------------------------------------
05/07/04 11:38AM *2241 04 6244587 00:01'39
05/07/04 11:38AM 233 03 0406779935-C 00:04'07 TR
27/07/04 04:16PM *195 04 0860111055322D 00:03'39
27/07/04 04:16PM 101 01 <I> 0'03 00:00'15
The format of the rawdata is thus not the standard. You need to check why this is happening. If you disconnect the serial cable from the buffer and connect it straight to a PC, use putty to log rawdata and see if still scrambled. If the TNG PC does not have a serial port, use another PC for example a laptop or a USB2Serial converter.
See forum post : How do I enable logging of data in Putty?. You can download putty from the internet.
- If rawdata still scrambled, the problem is between the PABX and the PC. Check the following posts:
What causes scrambled data?
What are the pinlayouts for the Panasonic KX-TEA308? - If not scrambled, the problem is between the buffer and the PC. Try the following post:
How do I reset the TNG buffer?