I configured a Simple Custom ratebook.
Calls for prefixes in ini file will cost at custom rate and not in file will overflow to:
RATE=za_telkom.dll
The custom ratebook is selected under TRUNK CONFIGURATION.
Some calls cost incorrect.
THINGS TO CHECK:
- The Simple Custom ratebook can only cost the prefixes you specified.
Ensure your list is completed.
NOTE: You can configure a default rate book:
C:\Program Files (x86)\Datatex\tng\rates
In this example all 06 prefixes are costed by the Custom ratebook.
If prefix not found it will use the Telkom standard rates.
If you want no default ratebook, then leave it blank next to 'RATE='- Code: Select all
;code=S,Cost PerSec,MinCost,RateType,Desc
RATE=za_telkom.dll
27615=S, 0.016520, 0, M, CELLC,
27616=S, 0.016520, 0, M, CELLC,
27617=S, 0.016520, 0, M, CELLC,
27618=S, 0.016520, 0, M, CELLC,
27619=S, 0.016520, 0, M, CELLC,
27620=S, 0.016520, 0, M, CELLC,
27621=S, 0.016520, 0, M, CELLC,
27622=S, 0.016520, 0, M, CELLC,
27623=S, 0.016520, 0, M, CELLC,
27624=S, 0.016520, 0, M, CELLC,
27625=S, 0.016520, 0, M, CELLC,
27626=S, 0.016520, 0, M, CELLC,
27627=S, 0.016520, 0, M, CELLC,
27628=S, 0.016520, 0, M, CELLC,
27629=S, 0.016520, 0, M, CELLC,
27630=S,0.016520,0.0,M,MTN,
27631=S,0.016520,0.0,M,MTN,
27632=S,0.016520,0.0,M,MTN,
27633=S,0.016520,0.0,M,MTN,
27634=S,0.016520,0.0,M,MTN,
27635=S,0.016520,0.0,M,MTN,
27636=S,0.016520,0.0,M,Vodacom,
27637=S,0.016520,0.0,M,Vodacom,
27640=S,0.016520,0.0,M,MTN,
27641=S, 0.016520, 0, M, CELLC,
27642=S, 0.016520, 0, M, CELLC,
27643=S, 0.016520, 0, M, CELLC,
27644=S, 0.016520, 0, M, CELLC,
27645=S, 0.016520, 0, M, CELLC,
27646=S,0.016520,0.0,M,Vodacom,
27647=S,0.016520,0.0,M,Vodacom,
27648=S,0.016520,0.0,M,Vodacom,
27649=S,0.016520,0.0,M,Vodacom,
27654=S, 0.016520, 0, M, CELLC,
27658=S, 0.016520, 0, N, TELKOM,
27659=S, 0.016520, 0, N, TELKOM,
27660=S,0.016520,0.0,M,Vodacom,
27661=S,0.016520,0.0,M,Vodacom,
27662=S,0.016520,0.0,M,Vodacom,
27663=S,0.016520,0.0,M,Vodacom,
27664=S,0.016520,0.0,M,Vodacom,
27665=S,0.016520,0.0,M,Vodacom,
NOTE: This is an example of the content of the ini file in the rates folder. Refer to last step.
The ini file must have the same name as your rates dll, for example 'all_custom_simple.ini' - VAT Factor
Make sure VAT Factor is correct. - For latest version: Windows dll
Once downloaded, then unrar the file - password is 'datatex'.
Save in folder C:\Program Files (x86)\Datatex\tng\rates
NOTE:You need to replace the existing 'all_custom_simple.dll' to update it.
For Linux version refer to point 5 to download. - Please use TNG verssion 1.1.1.12 or newer
TNG 1.1.1.12 Download Links - Follow steps to ensure custom rates was configured correct:
TNG - Simple Custom Rate
SUMMARY OF CUSTOM RATES UPDATES STEPS:
- Upgrade TNG to version 1.1.1.12
- Stop the TNG service
- Save 'all_custom_simple.dll' to:
C:\Program Files (x86)\Datatex\tng\rates - Create 'all_custom_simple.ini' in the same folder and
copy example ini content to it(refer to step 1).
Now update the rates as per your provider - for more details refer to TNG - Simple Custom Rate - Start the TNG service.
- Select the new ratebook under Trunk Configuration:
- as your default ratebook.
- Add all trunk lines and select custom ratebook for each.