TNG & EPYGI: configuration of account codes on a EPYGI PABX

[Belinda Frick]

This is the configuration that the Epygi must have to at least connect to the TNGEpygiRadius service.

RADIUS Client Settings
--------------------------
{Name}

Enable RADIUS client - must be ticked

Registration Settings
Primary Server: "IP of the Radius Server"
Secondary Server:
NAT station IP: . . .

Secret Key: ******* value is "TNG"
Confirm Secret Key: ******* Value is again "TNG"
Retry Count: 3
Receive Timeout (sec): 5
Encoding Type: PAP
Authorization port: 1812
Accounting port: 1813

Authentication Settings
Enable common login for all users in time of by Phone authentication - not ticked

Username: TNG
Password: *******

Authentication on Destination RADIUS Server:

Username: TNG
Password: ******* value is "TNG"
Confirm Password: ******* value is "TNG"

Accounting Settings
Use this User Name if accounting only is required.

User Name:

Send Accounting messages:

Both Start and Stop message - must be ticked
Only Stop message - not ticked


Sample of rawdata from EPYGI logs:
Note that if you don't see these type of logs, only the first 100 entries generate these type of logs.
You will have to restart the service to get the logs to display in debug mode again.
While it is restarting, you might loose some call details, if the service is down for to long.

2009-09-09 13:42:43.968 [1.0.2.11] -> PACKET Code : 4 (Accounting-Request)
2009-09-09 13:42:43.968 [1.0.2.11] -> PACKET Identifier : 219
2009-09-09 13:42:43.968 [1.0.2.11] -> PACKET Length : 766
2009-09-09 13:42:43.968 [1.0.2.11] -> PACKET Request Authenticator : 741FB9AFF983DD21F54C8108639CB13E
2009-09-09 13:42:43.984 [1.0.2.11] -> STATUS : 2(STOP)
2009-09-09 13:42:43.984 [1.0.2.11] -> CallingParty : 228
2009-09-09 13:42:43.984 [1.0.2.11] -> CalledParty : 0861114351@196.30.127.180:5060
2009-09-09 13:42:43.984 [1.0.2.11] -> +--------------------+
2009-09-09 13:42:43.984 [1.0.2.11] -> | Generic Attributes |
2009-09-09 13:42:43.984 [1.0.2.11] -> +--------------------+
2009-09-09 13:42:43.984 [1.0.2.11] -> 001 :: 228

EPYGI account code is in field '001' in the 'Generic Attributes' section
of the stop packet (see STATUS).