TNG Update 1.1.1.12

[Leon van Heerden]

Please note that there are 2 updates. TNGLive and TNG, please ensure that you use the correct update for your installation.
Which update to use?

• If you have a buffer connected, or a version prior to 1.1.1.1, you require the normal TNG Update.
• If your TNG requires internet access, you don't have a buffer, and/or it states TNGLive on the header banner of your Web interface, you require the TNGLive update.
• If you are running a TNG 4*, these 2 updates will not work on them. We will do a separate release and update this post. Also know that the TNG 4* is now only supported with an installation directly on the Asterisk server.

The following changes are available in the 1.1.1.12 update.

• Telkom Rates Aug 2013
• Custom_simple Rates
• TNG 1.1.1.12

The following changes are available in the 1.1.1.12 Install.

• Telkom Rates Aug 2013
• Updated Exchange Libraries
• Botswana BTC Rates
• Custom_simple Rates
• New PBX support (Plugins)
• New Buffer drivers
• TNG 1.1.1.12 can send non-plain text characters as login details to Network PBXs

Buffer

• Drivers that support Buffer version 1.08
• 32Bit and 64Bit
• Supports Windows 8 and Server 2012

Telkom and Telkom Supreme Call rates:

• Major update of other operator destinations, rate codes and international destinations.
• Includes new VOIP Numbers ranges and Cellular number ranges
• SupremeCall 1000 = R200, R300, R500, R1000, R1750 and R2500
• SupremeCall 8000 = R4000, R6000 and R8000
• SupremeCall 10000 = R10000, R12000 and R15000
• SupremeCall 18000 = R18000
• SupremeCall 20000 = R20000 through R300000

Please note that if you use the Supreme call rates, only the above entries have been updated. If your TNG is using one of the other rates, please change to the appropriate rate that covers your site. E.G. if you were on Supreme call 6000 , you should change your rate in the selection to the SupremeCall 8000 as listed above.

Exchange Libraries

• Major update of exchange names and numbers
• Many new International and local destination descriptions

Botswana BTC Rates

• If the number is shorter than 5 digits, the local area code is added to the number to allow lookup of the number.
• The correct cellular number ranges has been added.
• New VOIP Number ranges have been added.

Custom Rates

• Custom and Custom_Simple rates have been recompiled for 1.1.1.12
• Both rates have been compiled for Linux as well
• Most of the cellular providers' rates files have been replaced with Custom_Simple rates configuration files to allow easier updates
  More details on how to configure your own rates here

Plugins (Installation only)

• PAastra_A470_Format_PC5 (PC5 Format)
• PAlcatel_OXO_OmniPCX_Office (Better valid data checks)
• PAudiocodes_Mediant_Pipe (Example INI file included)
• PAvaya_IP_Office (Can handle pin codes and account codes at the same time)
• PMitel5000 (Mitel 5000 plugin requires TNG 1.1.1.12 and the SMDR password from the PBX)
• PPanasonicTES824 (Handle Incoming CLI)
• PanasonicTDA.dll (Better handling of short phone numbers)
• PNEC_IPC100_S70H_R501 (Can be configured to swap month and day around)
• Previously missing plugin references has been fixed
  
  • PAlcaltel_OXO
  • PBTVersatility
  • PConvergence30
  • PIntertel_CS5000
  • PLGGDK100
  • PLGGDK162
  • PLGGDKFPII
  • PLGOpticon
  • POfficelink
  • PSamsungDCSCompactII
  • PSamsungPlastic
  • PSiemens118
  • PanasonicKXTD816
  • PanasonicTEA824
  • PanasonicTES824
  
  Updates
  
  You have to be on version 1.0.7.6 at least to be able to use this update.
  For 1.0.7.6 update see TNG: Why is my 8TA calls costing at zero?
  
  For windows
  
  • tng-zarates-update-1_1_1_12.zip
    
    
  • tnglive-zarates-update-1_1_1_12.zip
  
  For Linux ("chmod +x" the file and run it to upgrade)
  Right Click these files and select the Save option, not just click on them, it will try and display the file.
  
  • tng-update-1_1_1_12
  • tnglive-update-1_1_1_12
    
    To update for example 'tnglive-update-1_1_1_12':
    
    1. Right-click and save the file onto the Asterisk server.
    2. Navigate to folder where it was saved and use the command to make it an executable:
       

       Code: Select all

       chmod +x tnglive-update-1_1_1_12

    3. run the update:
       

       Code: Select all

       ./tnglive-update-1_1_1_12

  Install files
  
  For Windows
  
  • TNG_setup_1_1_1_12.exe(with buffer)
    
  • TNGLive_setup_1_1_1_12.exe
  
  For Linux (Ubuntu/Debian)
  
  • tng-1.1.1.12-1_all.deb(TNG with buffer)
    NOTE: The plugins are not included. Please find out your PABX brand and model from your PABX vendor. You can register on the forum and post a request for the plugin.
  • tnglive-1.1.1.12-1_all.deb(TNG for Asterisk)

If you installed the wrong update:
Installing the TNGLive update on a TNG with a buffer, will put your TNG in Free mode with limited features. Please just run the Buffer upgrade to fix it.

Installing the TNG with buffer update on a TNGLive, will have the TNG searching for a buffer and never starting properly. Please just run the TNGLive update to fix it.