custom rates at different branches using 'All Custom Simple'

Moderators: Leon van Heerden, Luanda_Junzi, Belinda Frick, Lee Hendricks

custom rates at different branches using 'All Custom Simple'

Postby Belinda Frick » Mon Jun 09, 2014 6:19 pm

How do I setup custom rates at different branches using the All Custom Simple All rates?

Required:

  • TNG version 1.1.1.12.

  • Your subscription must be up to date. The creation date of your custom ratebook cannot be a date after the TNG subscription expiry date, else it will give an subscription error for your ratebook.

  • Custom rates as per service provider per call prefix.
    NOTE: Cost must be excluding VAT.

    In this example we will use the following rates for per second billing:
      Local calls 0.29c per minute(excluding VAT)
      Long distance 0.42c per minute(excluding VAT)
      Fixed to all mobile networks 0.84c per minute(excluding VAT)
    This translates to:
      Local calls R 0.004833 per second
      Long distance R 0.007000 per second
      Fixed to all mobile networks R 0.014000 per second
    The amount was calculated by deviding the per minute rate by 60 to get the per second cost.
    NOTE: If the amount included VAT, you need to first calculate the amount without VAT and then convert to per second. To calculate amount without VAT, if for example you VAT factor is 14%: multiply the per minute rate by 100/114.

  • Switchboard numbers and local area prefixes per switchboard number.

    In this example we will use switchboard number 0215924033

Steps to follow:

  1. Configure your 'Area Information' under 'Communication Configuration' secution as follows:

    In this example '0215924033' is the switchboard number and country is South-Africa(27):

    Local Number : 0215924033
    Local Code : 021
    Country Code : 27
    International Access Code : 00
    GMT Time Offset : 2

  2. You subscription must be up to date, else you cannot create a new custom ratebook. Custom ratebook creation date must be within the expiry date.

  3. Log out of TNG and stop the TNG service.

    How do I stop/start the TNG service in Windows?

  4. Go to the folder 'C:\Program Files\Datatex\tng\rates'.

  5. Make a copy of the 'all_simple_custom.dll' and rename it to your custom ratebook name, for example 'za_custom_test.dll'.

  6. Create a second file and name it, for this example 'za_custom_test.ini'. This is a plain text file.

  7. Paste the following into the 'za_custom_test.ini' file:

    Code: Select all
    ;code=S,Cost PerSec,MinCost,RateType,Desc

    RATE=za_telkom.dll
    271=S,0.007000,0,N, TELKOM
    2721592=S,0.004833,0,L, TELKOM
    272=S,0.007000,0,N, TELKOM
    273=S,0.007000,0,N, TELKOM
    274=S,0.007000,0,N, TELKOM
    275=S,0.007000,0,N, TELKOM
    276=S,0.007000,0,N, TELKOM
    27710=S,0.014000,0.0,M,MTN,
    27711=S,0.014000,0.0,M,Vodacom,
    27712=S,0.014000,0.0,M,Vodacom,
    27713=S,0.014000,0.0,M,Vodacom,
    27714=S,0.014000,0.0,M,Vodacom,
    27715=S,0.014000,0.0,M,Vodacom,
    27716=S,0.014000,0.0,M,Vodacom,
    27717=S,0.014000,0.0,M,MTN,
    27718=S,0.014000,0.0,M,MTN,
    27719=S,0.014000,0.0,M,MTN,
    2772=S,0.014000,0,M, VODACOM,
    2773=S,0.014000,0,M, MTN,
    27741=S,0.014000,0.0,M,Virgin Mobile,
    2774=S,0.014000,0,M, CELLC,
    27761=S,0.014000,0,M, VODACOM,
    27762=S,0.014000,0,M, VODACOM,
    27763=S,0.014000,0,M, VODACOM,
    27764=S,0.014000,0,M, VODACOM,
    27765=S,0.014000,0,M, VODACOM,
    27766=S,0.014000,0,M, VODACOM,
    27767=S,0.014000,0,M, MTN,
    27768=S,0.014000,0,M, MTN,
    27769=S,0.014000,0,M, MTN,
    2776=S,0.014000,0,M, VODACOM,
    2778=S,0.014000,0.0,M,MTN,
    2779=S,0.014000,0.0,M,Vodacom,
    27810=S,0.014000,0.0,M,MTN,
    27811=S,0.014000,0.0,M,8TA,
    27812=S,0.014000,0.0,M,8TA,
    27813=S,0.014000,0.0,M,8TA,
    27814=S,0.014000,0.0,M,8TA,
    27815=S,0.014000,0.0,M,8TA,
    27816:=S,0.014000,0.0,M,WBS Mobile,
    27817=S,0.014000,0.0,M,8TA,
    27818=S,0.014000,0.0,M,Vodacom,
    2781=S,0.014000,0,M, 8TA,
    2782=S,0.014000,0,M, VODACOM,
    2783=S,0.014000,0,M, MTN,
    2784=S,0.014000,0,M, CELLC,
    2786=S,0,007000,0,N, TELKOM
    2787=S,0.007000,0,N, CentraCom
    279=S,0.007000,0,N, TELKOM
    ;27215924033=S,0,0,O,Interbranch


    These entries contains all the known local, national and cellular prefixes. It can be used as a template. I have attached the file also. You need to download and rename the 'txt' file extension to 'ini':
    za_custom_test.txt


    This example has per second billing

    The entry 'RATE=za_telkom.dll' means that it is the default ratebook. Call for all prefixes not specified in the file will default to the 'za_telkom' rate. You can change this if you have a different service provider.

    NOTE: The costing in this example is without VAT. TNG will add the VAT as per VAT rate configured.

    If you have any additional prefixes, you will need to add them. For more details on the simple custom all ratebook feature refer to forum post:
    TNG - Simple Custom Rate

    Save the changes to the file - if any made.

  8. Start the TNG service.

  9. Log into TNG.
    It might take longer than usual to startup, because it is creating the new exchange file.

  10. Make a test Call Cost Calculation to check your rates.

  11. If happy with the rates, can now set your default ratebook as 'za_custom_test' or just add the required trunks that must be used with this custom ratebook. Go to 'Trunk Configuration' and click on the 'Ratebook' drop-down, you will see the 'za_custom_test' ratebook option.

    You can try a 'Data Synchronization' for the required period to cost at custom rates.
    Refer to forum post: How do I synchronize TNG data?

Custom rates at branches:

If you now do custom rates at a different branch, repeat the process and
configure the area information in TNG as per branch requirements
In the custom rates ini, the switchboard number is a local call and therefore configure this as 'L' and not national. Also change remove the 021592 entry and add the switchboard prefix for example 011787 for branche in Pretoria.

For switchboard 021 5924033:
Code: Select all
271=S,0.007000,0,N, TELKOM
2721592=S,0.004833,0,L, TELKOM
272=S,0.007000,0,N, TELKOM

For switchboard 0117872000:
Code: Select all
271=S,0.007000,0,N, TELKOM
2711787=S,0.004833,0,L, TELKOM
272=S, 0.007000,0,N, TELKOM
You do not have the required permissions to view the files attached to this post.
Belinda Frick
 
Posts: 3792
Joined: Fri Nov 12, 2010 4:25 pm

Re: custom rates at different branches using 'All Custom Sim

Postby Belinda Frick » Tue Jun 17, 2014 3:03 pm

TNG not costing with Custom rates:

    Windows setting: Please check the following
    • Regional and Currency settings must be set to:
    • UAC must be disabled, else it does not allow you to save the changes made for custom rates files. I must be set to 'never notify' to be disabled.

      UAC-windows.jpg
You do not have the required permissions to view the files attached to this post.
Belinda Frick
 
Posts: 3792
Joined: Fri Nov 12, 2010 4:25 pm


Return to Support Archive's (TNG)

Who is online

Users browsing this forum: No registered users and 1 guest

cron