How do I add a SIP Device on the MSL?

[Belinda Frick]

1. Log into the MSL.
   Also see forum post: MSL: How do I check if a device is connected?
   
   
2. Select 'Mitel Border Gateway' under 'Applications' in the left hand margine.
   
   
3. SIP support must be enabled.
   
   Click on 'Configuration' tab and then 'Settings'. Under 'SIP options' enable 'SIP Support'.
   
   amt-src-sip-ext-enable.jpg
   
   
   
4. Click on the 'Services' tab and then ' SIP Devices'. To add a SIP Devices, click on the link 'Add a SIP Device' - see below:
   
   amt-src-sip-ext-add.jpg
   
   
   
5. Configure the SIP Device details:
   
   amt-src-sip-ext-add-detail.jpg
   
   

   Code: Select all

   (The extension name and password on MBG &PABX must be the same)
Set-side username:=Extension name number on the MBG
3333
Set-side password:=Extension password on the MBG
••••
Confirm set-side password:   
••••

Icp-side username:=Extension name number on the PABX
3333
Icp-side password:Extension password on the PABX
••••
Confirm icp-side password:   
••••

PRACK support:   
Options keepalives:   
Heartbeat interval:   
Challenge methods:   Use master setting  Override
Description:=Phone Name to be displayed on the MBG   
3333
Enabled:   
Configured ICP:   
Local streaming:   
Call recording:   
Log verbosity:   
Enable Detailed Jitter Log:   
RTP Framesize: