How to configure AmtMitel

All documents from the original Software Support Library (SSL)

Moderators: Leon van Heerden, Luanda_Junzi, Belinda Frick, Lee Hendricks

How to configure AmtMitel

Postby Belinda Frick » Thu Nov 18, 2010 12:25 pm

Overview:

AmtMitel is used to collect call details from the Mitel 3300 ICP, in place of SMDR.

AmtMitel can run from a Windows PC or on the Amethyst Server. It connects to the PABX using MiTAI and forwards the translated call data directly to AMETHYST on port 27002. In a CRE solution, the CRE connects directly to the AmtMitel and requests the information in real-time.

It also has an option where TNG can connect to the SMDR port 27982 to receive an encrypted pip string, example:
Code: Select all
PDM:UgsHo9B5xO1RA1aj1m7D7lsOH+7QZMLsHQsdq9Fkw+pTCBzurSiK7R0JVqDTKMXvHXR13K0Gu5wtRxru0iiKoR1pQv2MMJf9IF9L/5Eoito=
PDM:UgsHo9B5xO1RA1aj1m7D61sJGe7QZMXqHQsYo9pjxORSDRLuqyiK7R0KVqbaKMTtHXJ106wHoZgzfm7u0ijGoR1HVtaLJ5O8El4Ko54o9ts=

Please use the PTopazPipe.dll version 2008.11.21.1 or newer as plugin.

Required:

Mitel PABX
On Windows, DotNET2 must be installed (Most new PCs already has this installed)
On the Mitel "Class of Service Option assignment" for all the phones and trunks that are to be used, these settings must be on :
Code: Select all
"HCI/CTI/TAPI Call Control Allowed"  = YES
"HCI/CTI/TAPI Monitor Allowed" = YES


AmtMitel for Windows
Minimum version for TNG to work as AmtMitel Version 1.5.14.5 and TNG 1.0.6.0.

Configuration:

To forward SMDR to AMETHYST, enter the AMETHYST IP under
the AMETHYST section
Code: Select all
[AMETHYST]
AMTHOST=192.168.2.30

To connect to the Mitel, configure the PABX IP under.
Multiple IPs can be specified here and then multiple sections for the other PBXs can be configured.
This way one AmtMitel can connect to multiple PBXs.
Code: Select all
[CONTROLLERS]
192.168.1.2=

You need to specify the extension for this PABX IP:
Code: Select all
[192.168.1.2]
7318=
7328=
1000-1099=

And the trunks for this PABX IP:
Code: Select all
[192.168.1.2_TRUNKS]
1=
2=
100-129=


In the above example extensions 7318 and 7328 and the entire range from 1000 to 1099 will be monitored.
The trunks 1, 2, and the entire range from 100 to 129 will be monitored

Sample of AMTMitel.ini

Code: Select all
[SETTINGS]
#if you are not debugging something leave this 0 as the logs can grow very quickly
DEBUGLOGS=0
SMDRLISTENPORT=27982
SENDVIRTUAL=1

[MITEL]
KEEPALIVEINTERVAL=30

[AMETHYST]
AMTHOST=192.168.2.30
AMTPORT=27000

[CLIRULES]
0=Number|starts with|00|replace with|0|False|INCOMING
1=Number|starts with|00|replace with|0|False|OUTGOING
;2=Number|starts with|*100|replace with||False|OUTGOING
;3=Number|ends with|#|replace with||False|ANY

[CONTROLLERS]
192.168.1.2=
;192.168.0.2=

[192.168.1.2]
7318=
7328=
7353=
7398=
8313=
8341=
8372=
8457=
8466=
8471=
8483=

[192.168.1.2_TRUNKS]
1-33=

[192.168.0.2]
7000-7002=

[192.168.0.2_TRUNKS]
101-103=

[CLIRULES_SAMPLE]
0=Number|starts with|00|replace with|0|False|ANY
Belinda Frick
 
Posts: 3808
Joined: Fri Nov 12, 2010 4:25 pm

Re: How to configure AmtMitel

Postby Belinda Frick » Thu Jun 29, 2017 2:47 pm

Belinda Frick
 
Posts: 3808
Joined: Fri Nov 12, 2010 4:25 pm


Return to Support Archive's (Amethyst)

Who is online

Users browsing this forum: No registered users and 1 guest

cron