PABX3 Red Circle: 'missing' calls when using the LG Opticon

[John Richard Procter]

1. The LG has a default setting that will buffer about 60
   calls, thereafter it does not send off call records.
   
   Please change this default setting under the LG programming
   to continious output to receive all your call data.
   
   Please contact LG PABX support to enable this feature.
   
2. PABX3 version 3.3.3.9 has the feature to re-connect. This is set
   with the "TimeOut" option under "Communications". If
   set to 60 it will only reconnect (close and re-connect to the comport)
   every hour. You can set it to for example 2 minutes.
   
   The log is found in the location C:\Program Files\Datatex\Pabx3\LOGS\200841,
   where 200841 is the week of the year when the log was created.
   
3. When is the Comport opened and closed?

PABX3 Opens the comport on start and on close.

• pabx3.log:
  2008-10-07 14:22:31.213 [3.3.3.9]Closing PABX3...
  2008-10-07 14:22:31.229 [3.3.3.9]Disconnect Ports
  2008-10-07 14:22:31.254 [3.3.3.9]TelnetDisconnect
  2008-10-07 14:22:33.569 [3.3.3.9]Starting PABX3...
  
• It also closes and re-opens the comport everytime you make a change
  in the Settings screen.
• If no data is received for the timeout period, the comport is closed
  and re-opened.